| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CQB-F fluoroplastic magnetic drive pump Made of polyvinylidene fluoride, magnetic pumps produced with this material have a wide range of uses, strong corrosion resistance, high mechanical strength, no aging, and no toxin decomposition.
CQB-F fluoroplastic magnetic drive pump Model meaning
For example: CQB50-32-160F
CQB-magnetic drive centrifugal pump
50-suction port diameter (mm)
32-Discharge port diameter (mm)
160-impeller nominal diameter (mm)
F-Fluoroplastic
CQB-F fluoroplastic magnetic drive pump Performance parameters
Flow: 1.8-100m3/h
Lift: 8-32m
Motor power: 0.12-18.5KW
Speed: 2900r/min
Operating temperature: -20ºC to 100ºC.
CQB-F fluoroplastic magnetic drive pump Features
The design of the fluoroplastic magnetic pump not only has the advantages of ordinary magnetic pumps such as compact structure, beautiful appearance, small
size, low noise, reliable operation, etc., but its flow-passing parts are all made of the "King of Plastics" (King of Plastics) with excellent corrosion resistance in the
world. Fluorine plastic), the isolation sleeve is made of special materials, has high strength mechanical properties, and eliminates the magnetic eddy current
phenomenon that exists in ordinary magnetic pumps. Therefore, the fluoroplastic magnetic pump can transport corrosive media such as acids, alkalis, and
oxidants of any concentration (strength) without being damaged. The leak-proof design eliminates the shaft seal and uses magnetic coupling to drive indirectly,
completely eliminating the trouble of dripping and never polluting the use site.
CQB-F fluoroplastic magnetic drive pump Classification: At present, the fluoroplastic magnetic pumps produced by domestic manufacturers mainly include: CQB fluoroplastic magnetic pump, ZMD
fluoroplastic self-priming magnetic pump, IMD fluoroplastic magnetic drive pump, etc. Because the flow-passing part of the pump is made of "fluoroplastic
alloy". It can continuously transport corrosive media such as acids, alkalis, and strong oxidants of any concentration without being damaged. The CQB-F fluoroplastic
magnetic pump has a unique design. It does not require mechanical shaft seals and is absolutely leak-proof. The liquid flow parts are made of fluoroplastics, ceramics,
fluororubber and other materials. The pump body shell is fixed with metal materials, so the pump body is sufficient to support the pipeline. weight, maintenance and
convenience.
CQB-F fluoroplastic magnetic drive pump Working principle
The driving device adopts an active magnet coupling and is directly mounted on the motor shaft. The pump chamber is completely enclosed and indirectly drives the impeller with magnets on the pump shaft to rotate through magnetic coupling. The structure is compact, safe and energy-saving. Sturdy and durable pump body structure Although the liquid-contacting part is made of fluoroplastic, the pump casing is made of metal, so the pump body is strong enough to withstand the weight of the pipeline and withstand mechanical impact. Fluoroplastic magnetic pump consists of three parts: pump, magnetic transmission and electric motor. The key component of the magnetic actuator is composed of an outer magnetic rotor, an inner magnetic rotor and a non-magnetic isolation sleeve. When the motor drives the outer magnetic rotor to rotate, the magnetic field can penetrate the air gap and non-magnetic materials, driving the inner magnetic rotor connected to the impeller to rotate synchronously, realizing contactless transmission of power and converting the dynamic seal into a static seal. Since the pump shaft and internal magnetic rotor are completely sealed by the pump body and isolation sleeve, the problem of "running, popping, dripping, and leaking" is completely solved, and the leakage of flammable, explosive, toxic, and harmful media through the pump seal in the refining and chemical industry is eliminated. potential safety hazards, effectively ensuring the physical and mental health and safe production of employees.
CQB-F fluoroplastic magnetic drive pump Main purpose
This product is widely used in: petrochemical industry, acid and alkali production, non-ferrous metal smelting, pickling process of automobile manufacturing, rare earth separation, pesticides, dyes, medicine, paper making, electroplating, radio and other industries.
CQB-F fluoroplastic magnetic drive pump Structure diagram
CQB-F fluoroplastic magnetic drive pump Installation, use and maintenance
1. The pump should be inspected before use. The motor fan blades must rotate flexibly, there is no jamming or abnormal noise, and all fasteners must be tightened.
2. After the motor of the CQB-F2 fluorine-lined magnetic pump is started, slowly open the discharge valve. After the pump enters normal working condition, adjust the
discharge valve to the required opening.
3. The CQB-F2 fluorine-lined magnetic pump should be installed horizontally and not vertically. The pump body must not bear the weight of the pipeline. For special
requirements for vertical installation, the motor must be facing upwards.
4. Check whether the rotation direction of the motor of the CQB-F2 fluorine-lined magnetic pump is consistent with the steering mark of the magnetic pump.
5. When the suction liquid level is higher than the axis center line of the CQB-F2 fluorine-lined magnetic pump, just open the suction pipeline valve before starting.
If the suction liquid level is lower than the pump axis center line, the pipeline needs to be equipped with a bottom valve.
6. Before the CQB-F2 fluorine-lined magnetic pump stops working, the discharge valve should be closed first, and then the suction pipe valve should be closed.
CQB-F fluoroplastic magnetic drive pump Performance parameters
| model |
flow (m3/h) |
Lift (m) |
power(kw) | Voltage(V) |
| CQB16-16-80F | 1 | 8.5 | 0.12 | 220 |
| 1.8 | 8 | |||
| 2.2 | 7 | |||
| CQB20-20-100F | 1.8 | 12.5 | 0.37 | 220 |
| 3 | 12 | |||
| 3.6 | 10.5 | |||
| CQB16-16-80F | 1 | 8.5 | 0.12 | 380 |
| 1.8 | 8 | |||
| 2.2 | 7 | |||
| CQB20-20-100F | 1.8 | 12.5 | 0.37 | 380 |
| 3 | 12 | |||
| 3.6 | 10.5 | |||
| CQB32-25-125F | 1.9 | 20.8 | 1.1 | 380 |
| 3.2 | 20 | |||
| 3.8 | 19 | |||
| CQB32-25-160F | 1.9 | 20.8 | 1.5 | 380 |
| 3.2 | 32 | |||
| 3.8 | 19 | |||
| CQB40-32-115F | 3.8 | 16 | 1.1 | 380 |
| 6.3 | 15 | |||
| 7.5 | 13 | |||
| CQB40-32-145F | 3.8 | 26 | 2.2 | 380 |
| 6.3 | 25 | |||
| 7.5 | 22.5 | |||
| CQB40-32-160F | 3.8 | 34 | 3 | 380 |
| 6.3 | 32 | |||
| 7.5 | 28 | |||
| CQB50-40-125F | 7.5 | 22 | 2.2 | 380 |
| 12.5 | 20 | |||
| 15 | 18.5 | |||
| CQB50-40-160F | 7.5 | 34 | 3 | 380 |
| 12.5 | 32 | |||
| 15 | 29 | |||
| CQB65-50-125F | 15 | 22 | 4 | 380 |
| 25 | 20 | |||
| 30 | 18.5 | |||
| CQB65-50-160F | 15 | 34 | 5.5 | 380 |
| 25 | 32 | |||
| 30 | 29.5 | |||
| CQB80-65-125F | 30 | 22.5 | 7.5 | 380 |
| 50 | 20 | |||
| 60 | 18 | |||
| CQB80-65-160F | 30 | 34 | 11 | 380 |
| 50 | 32 | |||
| 60 | 29 |
CQB-F fluoroplastic magnetic drive pump Performance parameters
| model |
flow (m3/h) |
Lift (m) |
power(kw) | Voltage(V) |
| CQB16-16-80F | 1 | 8.5 | 0.12 | 220 |
| 1.8 | 8 | |||
| 2.2 | 7 | |||
| CQB20-20-100F | 1.8 | 12.5 | 0.37 | 220 |
| 3 | 12 | |||
| 3.6 | 10.5 | |||
| CQB16-16-80F | 1 | 8.5 | 0.12 | 380 |
| 1.8 | 8 | |||
| 2.2 | 7 | |||
| CQB20-20-100F | 1.8 | 12.5 | 0.37 | 380 |
| 3 | 12 | |||
| 3.6 | 10.5 | |||
| CQB32-25-125F | 1.9 | 20.8 | 1.1 | 380 |
| 3.2 | 20 | |||
| 3.8 | 19 | |||
| CQB32-25-160F | 1.9 | 20.8 | 1.5 | 380 |
| 3.2 | 32 | |||
| 3.8 | 19 | |||
| CQB40-32-115F | 3.8 | 16 | 1.1 | 380 |
| 6.3 | 15 | |||
| 7.5 | 13 | |||
| CQB40-32-145F | 3.8 | 26 | 2.2 | 380 |
| 6.3 | 25 | |||
| 7.5 | 22.5 | |||
| CQB40-32-160F | 3.8 | 34 | 3 | 380 |
| 6.3 | 32 | |||
| 7.5 | 28 | |||
| CQB50-40-125F | 7.5 | 22 | 2.2 | 380 |
| 12.5 | 20 | |||
| 15 | 18.5 | |||
| CQB50-40-160F | 7.5 | 34 | 3 | 380 |
| 12.5 | 32 | |||
| 15 | 29 | |||
| CQB65-50-125F | 15 | 22 | 4 | 380 |
| 25 | 20 | |||
| 30 | 18.5 | |||
| CQB65-50-160F | 15 | 34 | 5.5 | 380 |
| 25 | 32 | |||
| 30 | 29.5 | |||
| CQB80-65-125F | 30 | 22.5 | 7.5 | 380 |
| 50 | 20 | |||
| 60 | 18 | |||
| CQB80-65-160F | 30 | 34 | 11 | 380 |
| 50 | 32 | |||
| 60 | 29 |
Export wooden box packaging
Application cases of large flow channel non-blocking spiral centrifugal pump
Large flow channel non-blocking spiral centrifugal pump transports lime
Lime slurry (calcium hydroxide, Ca(OH), or milk of lime) is widely used worldwide to correct the pH value of wastewater and neutralize waste incinerator emissions.
Problem: The existing vortex tank feed pump had to be maintained monthly due to wear and tear on the lime slurry.
Process: Lime slurry is used to neutralize gas emissions from garbage incinerators and remove dioxins and similar harmful chemicals.
Solution: The large flow channel non-blocking spiral centrifugal pump B close-coupled pump has been running continuously for 36 months without any maintenance.
Large flow channel non-blocking spiral centrifugal pump transports kaolin slurry
Kaolin slurry is a highly abrasive, high-viscosity mineral clay widely used in the ceramic industry.
Problem: Due to the highly abrasive nature of the kaolin slurry, the screw pumps in the first two stages were severely damaged, resulting in the need to replace the rotor and stator combination every 3 months.
Process: Kaolin is the main component of porcelain. The slurry needs to be transferred to the mold and then fired in the kiln.
Solution: The large flow channel non-blocking spiral centrifugal pump LV long coupling pump equipped with belt drive is for continuous operation, and the maintenance cost savings have already made up for the initial capital expenditure.
){kind=link}